Basic Info.
Certification
CE, ISO9001
Maximum Lifting Weight
5-32t
Maximum Lifting Height
12-30m
Operation Form
Ground Operation
Service
Training and Overseas Maintenance
Power Supply
Three-Phase a.C. 380V, 50Hz
Operational Model
Cabin; Remote Control
Product Description
Product Introduction
1. MG type double girder hook gantry crane for project is applied to highway, bridges, power station and other Construction workshops for general handling and lifting operations.
2. The whole machine adopts truss structure, light weight, small wheel pressure and reliable performance.
3. Wind alarm, break-proof shaft, prevent the various security measures such as tilting is complete.
4. All institutions are indoor controlling, crane electric form is devided into two kinds of cables and sliding contact line, you can choose any one when you order it.
5. When choosing the crane need to fill in the order specification table, to be marked when using the working environment of low temperature and high temperature, and power supply, etc.
Feature:
1. Light weight, high stiffness, low in processing cost, and wind-resistance.
2. Unique steel pin connection, which is not only firm, but also easy to install.
3. Flexible pole outrigger, which is easy to be disassembly into pieces when move to a new site.
4. Smooth starting and stopping, safe and reliable traveling, long life.
5. Low noise, commodious cabin with good view.
6. Easy installation and convenient maintenance.
7. Excellent exchangeability for parts and components.
8. Crane drive: IP54 or IP44, level F insulation.
| MG Type 10 ton double girder gantry crane is one kind of minimum duty gantry crane, the working duty is A5! This product is widely used to transport, assemble, as well as load and unload at port, workshop, warehouses, goods yard, outside area, etc. There are two trolleys which can work together or seperate. |
| | |
| Working condition |
1. It is prohibited to use the equipment in the combustible, explosive and corrosives environment.
2. The industry voltage is 3Phase AC, 380V, 50 HZ. It can be design by your requirement. |
| Product detail description |
1. Strong beams. The crane beams are of welded construction. This result in lower dead
weight with a high degree of vertical and horizontal rigidity and smaller wheel loads;
2. Precise electric control system; Siemens and other international brand;
3. Durable performance and High efficiency;
4. Modern cabin control with Air conditioner to separate operators from harsh
environment;
5. Long working life with a low-maintenance.
| Safety features | 1. Overload protection: If the materials or electric
2. current overstep the capacity, the crane will give a
sharp warning for protection itself.
3. Emergency brake: If there's emergency situation, it
could stop the crane to protect operator and goods.
4. Rubber buffers.
| Operation model | | Cabin (open and closed) | | Motor | | The travelling motor can be soft start motor and frequency adjustable-speed motor to start steadily and run safely. | | |
|
|
Technical Parameter
| Lifting Capacity | T | 10/3.2 | 16/3.2 | 20/5 | 32/5 | 50/10 | 80/20 |
| Span | m | 22~40m |
| Speed | Main Hook Lifting | m/min | 8.0 | 8.0 | 7.0 | 7.0 | 5.0 | 4.0 |
| Aux. Hook Lifting | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 | 9.0 |
| Traveling of Trolley | 35 | 35 | 35 | 35 | 35 | 25 |
| Traveling of Crane | 35 | 35 | 35 | 35 | 35 | 25 |
| Operational Model | Cabin; remote control |
| Working Duty | A5 |
| Power Supply | Three-phase A.C. 380V, 50Hz |
Details of Double Girder Gantry Crane
This type of double girder gantry crane consists of 5 main parts, namely, the bridge structure, A-frame support legs, the traveling mechanism, the trolley and the electric equipment. It has box type and trussed type, box type has characteristic of slim body and strong lifting capacity; trussed type has characteristic of small windward surface, small deadweight and strong lifting capacity.
The girder could also have a double girder design for heavy duty applications, where a suitable track is provided on top of the girders for travel of crab wheels.
| Standard Features: |
| Motors: | The motors are used specially crane duty suitable for frequent starting , reversing & braking in accordance with ISO 9001:2000 ISO 14001:2004.Motors are totally enclosed in dust proof construction foot / flange mounted TESC / TEFC , Sq. cage motors with integrated safety brakes, insulation class F, IP54 protection for hoisting, CT & LT motions. |
| Brakes: | Independent Hydraulic Brake make the crane more safe and easier to control |
| Gear Box : | The entire gear boxes are made of accurate hob cut helical / spur gears & pinions having hardness 250 to 350 BHN made from carbon alloy steel. All gears & pinions running on antifriction type ball / roller bearings in totally enclosed oil bath giving constant splash lubrication. The helical / Spur gear designed for adequate strength and optimum wear resistance for smooth operation & long life. |
| Wheels: | The wheels of crane crab ,main beam and end carriage are produced in our special Vacuum casting workshop (No sand inclusion technic) ) which make our wheels more elastic and outer surface hard-wearing and durable. |
| Electrical Panel : | Modular design, ease to install and maintain, reliable operation, fuse less circuitry, ducted wiring and compact terminals. Motor overload protection to prevent overloading. |
| Limit Switch: | Safety limit switches for stoppers will be provided to prevent over traveling in all motions. |
| Painting: | Two coats of primer before assembly & two coats of synthetic enamel after testing. |
Optional Features :
Variable speed through VVF Drive
Soft starter
Slipring motors
Wireless Radio Remote control
Shrouded DSL system for power feeding
Flameproof
Cabin Operated
Tech parameter of Double Girder Gantry Crane 20 Ton China
Eight safety devices
Overload protect device
Limit switch for lifting
Limit switch for CT & LT traveling
Emergency stop system
Electric current overload protect device
Lower/Over voltage protect device
Phase order protection
Top quality long time bearing polyurethane materials buffer
Warranty Period:
Warranty period means all operations strictly comply with our company Production Manual , Ensure normal service life.
Main body: 12 months (from the date of delivery).
Spare Parts: 6months (from the date of delivery).
Warranty Principle:
Within warranty period, customer should appropriately transport, reserve, installation; Based on every process strictly as per Production Manual, production broken caused by production, assembly or material quality, and confirmed by ChongPeng Grup technology service team, it is our company duty, we offer free repair maintenance service; In Principle, we adopts change spare parts to solve problems; If need change complete set (just for winch), under confirmation of sale department and quality supervision department that cannot solve by spare parts replacement, it could be executed after general manager approval.
FAQ:
1. Are you manufacturer or trade Company?
Thanks for your question. We are a trade company founded in 2012 with trade team for professional international service.
2. How about MOQ policy?
MOQ can be 1 set.
3. Is your product customized?
Yes, because the working condition are different, all our products are customized depending on detail requirement!
4. What's the max lifting capacity of the crane?
The max. Lifting capacity of our standard crane are up to 550 ton (the electric hoists are up to 120 t). If this can't satisfy your working requirement. Please contact us for special customized.
5. My workshop space is limited. Is the crane applicable?
For low headroom workshop, we have the Special products. The detail dimension please consult our professional engineer.
6. Which port is the common port for the transportation of goods by your company?
Port of Tianjin and port of Qingdao.
ABOUT US
Suzhou Batis Trading Co., Ltd., founded in December 2012, is located in China energy saving industrial park, No.18, Dongchang road, Suzhou Industrial Park, with registered capital of CNY 5 million. Company is mainly engaged in: hoisting equipment, organosilicon products, auto parts, mechanical equipment, hardware and electrical equipment, construction materials, plastic products, Special construction machinery and equipment, hydraulic system and equipment, electrical equipment, electronic control products. The products are widely used in hardware, machinery, electrical appliances, automobile accessories, textile, printing and dyeing, pharmaceutical and other industries.
Our focus is to provide our customers a cost effective solution that will meet their material handling needs.
We provide whole series of overhead bridge cranes with capacity from 0.5 tons to 550 tons.
Our products not only for overhead crane, we still have gantry crane, jib crane, hoist and other crane parts.
We supply crane parts to many crane manufactures in China and outside.
We have CE and ISO certificate.
And we deliver the quality products you need, when and where you need them.
Our Services
Pre-Sales Service
Professional team:
1. One to one service guarantees you the best purchasing experience.
2. Strong production capacity and professional workmen guarantee you the short delivery.
3. Strict delivery inspection guarantees you the high quality products.
4. The short delivery time
After-Sales Service
Free to contact us:
1. One year warranty for whole machines
2. Providing free quick-wear part
3. Low charge for continue maintenance when warranty is expired
4. Exclusive engineer support at any time.
5. Highly professional training to end-users.
We can also design according to your demand!
If you want to get more information, please contact us directly, I'll give you the most efficient solution.
CONTACT US
ADD: Room B501,Building 40, No.18 Dongchang Road, China Energy Conservation Industrial Park, Suzhou, Jiangsu, China
Tel: 0512-6722 5950
Fax: 0512-6269 9551
Web: szbatis.en.made-in-china.com
